Important Notice Regarding Power Off Procedure - Aurender W20 Quick Start Manual

Important Notice:
Improper Shut Down Can Cause Damage
As with any computer, please avoid cutting power to the Aurender before properly shutting it down.
Your Aurender needs to be shut down properly to avoid damage.
There are 2 ways to shut down or restart your Aurender:
1. Press and hold the "play" button in the Aurender Conductor app. Then there will be a pop up where
you can choose "shut down" or "restart."
2. Press and release the power button on the face of the Aurender itself. It will start to
flash and on screen it will say "shutting down...Please wait." Note: in some cases you may
have to push the power button twice: once to "wake it up" and then again to shut it down.
PLEASE DO NOT PRESS AND HOLD THE POWER BUTTON AS THIS CAUSES A FORCED SHUT
DOWN.
During the Aurender shut down sequence, the power button backlight will pulse, and the screen will
read "Shutting Down...Please Wait."
Only after the screen has gone black and the power light is dim is it safe to flip the power switch on the
back.
Failure to shut the Aurender down properly when turning it off or rebooting can cause serious software
or mechanical damage.
- 14 -