Aurender ACS10 Manual
Hide thumbs Also See for ACS10:

Advertisement

ACS10 Manual

Instructions

Please read the following instructions carefully before setting up the Aurender Music Player.
• Be careful not to drop the device to avoid internal damage.
• Do not disassemble the device.
• Keep magnetic materials away from Aurender to prevent any damage to data.
• Do not expose device to oil, dust, water, high humidity, or smoke.
• Keep ventilation openings free from obstruction.
• When cleaning, use only a soft cloth. Keep out of contact with water or other liquids.
• All servicing must be performed by a quali ed representative, or the warranty will be voided.
• Unplug power cord during severe lightning storms or when unused for a long period of time.
• Unplug the device from the outlet only after completely turning o the unit.
• Always turn the power o before connecting or disconnecting any cables.
• Please note that hard drives can break down.
It is important to back up your music collection periodically to a separate memory device. In the
event of drive failure, Aurender is not responsible for any loss of data. The drive manufacturer
will only replace faulty drives under warranty and do not compensate for any loss of data.

Positioning

• Place your device on a at, horizontal, and stable surface.
• Keep away from heat sources, such as radiators.
• Do not stack other products on top of the Aurender.
• Allow space around the device for ventilation.
• Do not place inside an enclosed cabinet.

Front and Rear Panel

1/4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ACS10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aurender ACS10

  • Page 1: Front And Rear Panel

    It is important to back up your music collection periodically to a separate memory device. In the event of drive failure, Aurender is not responsible for any loss of data. The drive manufacturer will only replace faulty drives under warranty and do not compensate for any loss of data.
  • Page 2: Front Panel

    Front Panel 1. On/O /Standby In the default mode, pressing will power the unit on and completely o . In the Standby mode, pressing the front panel button will put the unit into standby, and the unit will turn on instantly. In standby mode, to turn the unit completely, press the button once so that it shows the display and press the button again so that it turns o .
  • Page 3: Rear Panel

    Rear Panel 1. USB Audio 2.0 Out 2. USB 3.0 Data Port 3. 1GBps Double isolated LAN port 4. 1Gbps LAN port 5. 1Gbps LAN port 6. AC Power Switch 7. AC Power Socket Connect to a power outlet with AC Power cord.
  • Page 4 If the devices are not grounded, a voltage potential di erence between devices can cause a voltage surge through the audio cable that can weaken and eventually damage sensitive circuits in D/A converters and other devices. Copyright © Aurender https://www.aurender.com/page/manual-acs10...

Table of Contents