Everpure H-54 Installation And Operation Manual

Thank you for purchasing an Everpure commercial-grade water
fi ltration system for your home. With your Everpure system, you
get premium quality water direct from your tap that's great-tasting,
healthful and convenient for you and your family.
Specifi cations:
For Cold Water Use Only
Temperature: 35-100°F (2-38°C)
Min.-Max. Working Pressure: 10-125 psi (0.7-8.6 bar)
Service Flow Rate: 0.5 gpm (1.9 Lpm)
H 1200 customers: Instructions for installing the H-1200 begin on page
4 of this Installation and Operation Guide.
MULTIPLE APPLIANCE CONNECTIONS: You can also connect your
Everpure Filter to several water using appliances, such as the
refrigerator for ice and water, an instant hot dispenser or chiller, or a
plumbed-in coffee brewer. Install connection "tees" (available from
any hardware / plumbing supply) in the water line between the fi lter
and the faucet adaptor, and run new tubing to each appliance.
We do NOT recommend connecting the fi ltered water to a commercial
ice maker, since these appliances require fl ow and volume beyond the
design limits of your under-sink fi lter system.
The Owner's Guide Is Applicable For The Following
Everpure Filter Models:
Model H-54
Rated Capacity:
750 Gallons (2835 Liters)*
Model H-300
Rated Capacity:
300 Gallons (1140 Liters)*
Model H-300+M
Rated Capacity:
500 Gallons (1892 Liters)*
* For optimum performance, cartridge replacement is required once a year,
or sooner if fl ow becomes too slow for convenience, or if the unit's rated
capacity is reached.
WARNING The Universal Plumbing Code adopted by over 20
states, and other specifi c state and county codes prohibit the use of
saddle valves and their use is never recommended. You must adhere
to your state / local plumbing codes. Consult your licensed plumber if
you have related questions.
WARNING Do NOT use copper tubing with the John Guest Fittings
provided with your Everpure Filter System. Copper tubing may appear
to fi t, but water leaks will develop over time and use. If copper tubing
is required, you must use copper compression fi ttings available from
any hardware/plumbing supply.
Installation and Operation Guide
Model H-104
Rated Capacity:
1,000 Gallons (3780 Liters)*
Model H-300-HSD
Rated Capacity:
300 Gallons (1140 Liters)*
Model H-1200
Rated Capacity:
1,000 Gallons (3780 Liters)*
BASIC INSTALLATION INSTRUCTIONS
TOOLS NEEDED FOR INSTALLATION
• Phillips Screwdriver
• Wrench
• Utility Knife
• Measuring Tape
• Pencil
1. Open Carton & Inspect Parts
Installation Parts
Key Description
1 QL3 Filter Head
2 Filter Cartridge
3 2 Screws w/ Locking Washers
4 Angle Stop Valve Adaptor
5 Tubing, 1/4" poly
6 Elbow Fitting Pack Restrictor
7 Tefl on ® Tape
8 Faucet Connector
9 Everpure Filter Timer
1
1
2
5
Drinking Water Systems
Part No.
EV9258-01
(varies)
EVxxxx-xx
EV3121-20
A08601-19
EV3081-68
EV3121-19
EV3121-35
EV9075-70
3
4
6
9
8
7