Saving The Real Time In The Time Code - Sony DNW-7/7P Operation Manual

4
Press the RET button on the lens.
This reads the previous recording, and synchronizes the internal time
code generator, thus allowing the new time code recorded to follow
on consecutively.

4-5-3 Saving the Real Time in the Time Code

Setting the PRESET/REGEN/CLOCK switch to CLOCK saves the real
time in the time code.
When it is necessary to set the real time, use the VTR menu.
For more information about the VTR menu, see Section 4-10 "VTR Menu Display
in the Display Panel" (page 4-87).
Chapter 4 Adjustments and Settings for Recording
4
4-29