Autofeed Technology; Technical Specifications - Swingline STACK-AND-SHRED 80X Instruction Manual

Hide thumbs Also See for STACK-AND-SHRED 80X:
Table of Contents

Advertisement

https://www.supplychimp.com/
English

autofeed technology

The Stack and Shred 80X has been designed to automatically shred up to 80 sheets from the
auto-feed chamber and up to 6 sheets through the manual feed slot. The auto-feed mechanism has
been designed to handle paper fastened with staples and paper clips and to only pull a few sheets
of paper into the cutting mechanism to minimise the risk of paper jams.
To guard against injury, the following basic safety precautions must be observed in the set-up of this
product.
• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not
likely to trip up a passer by.
• Any attempt to repair this unit by unqualified personnel will invalidate the warranty. Please return to
supplier.
• Unplug your shredder before moving it or when it is not in use for an extended period of time.
• Do NOT operate with a damaged power supply cord or plug, after it malfunctions, or after it has
been damaged in any manner.
• Do NOT overload electrical outlets beyond capacity as this can result in fire or electrical shock.
• The socket-outlet should be installed near the equipment and shall be easily accessible.
• Do NOT alter the attachment plug. The plug is configured for the appropriate electrical supply.
• Do NOT use near water.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
• Do NOT load the auto-feed chamber with unopened junk mail, magazines, bound documents etc.
Although this shredder has been designed to comply with UL 60950-1 EN 60950-1 safety standards
including the "probe accessibility tests", do not operate the shredder near children or pets.

technical specifications

Swingline Stack and Shred 80X
Sheet capacity:
Manual feed slot
Sheet capacity:
Autofeed chamber
Duty Cycle
6
6 sheets (80gsm)
80 sheets (80gsm)
8 min ON / 45 min OFF
Run time from cold
9 minutes
Volts / Hz
120V / 60Hz
Amperage
0.8 Amps
Motor Watts
180 Watts

Advertisement

Table of Contents
loading

Table of Contents