Safety Symbol Summary - Generac Power Systems MMG480DI4 Operating Manual

Safety

SAFETY SYMBOL SUMMARY

The safety and operating decals affixed to the unit provide important instructions and warn of dangers and hazards.
Replace any missing or hard-to-read decals and use care when washing or cleaning the unit. Decal placement and
part numbers can be found in the online parts manual at www.generacmobile.com. Below is a summary of the
intended meanings for the symbols used on the decals.
Safety alert symbol;
used to alert you
to potential hazards.
Hot surface(s) nearby.
Dangerous voltage may
be present.
Check diesel fuel fill
level.
Read and understand
the operator's manual
before operating.
Stop engine.
STOP
Battery is
disconnected.
4
Asphyxiation hazard;
operate in well ventilat-
ed area.
Burn/scald hazard;
pressurized steam.
Anchor/tie down point.
Disconnect battery
before servicing.
Unit electrical ground.
Isolate generator to
prevent electrocution
hazard.
Automatic Start.
Force Exhaust
Regeneration.
Figure 1-1. Decal Safety Symbol Summary
MMG330DI4-480DI4 Operating Manual
Belt/entanglement
hazard; keep body parts
clear of this area.
Never change phase
208
120
switch position while
480 240
277 120
engine is running.
Do not remove guard.
Fire/explosion hazard;
keep open flames
away from unit.
Lift here only.
Never change switch
position while engine is
running.
Fan hazard; keep body
parts clear of this area.
01879
33797 C