Idle Display - Motorola MTP830 S Product Information Manual

Icon

Idle Display

The terminals provide access to all services from the main idle display.
Your service provider can configure the idle display. The idle display can show the following:
• Icons on the status area (top line):
- Status icons in TMO signal level icon.
- Battery level displayed at all times
Description
• for the selected talkgroup,
• for the highlighted private number,
• for the manually entered private number,
• when transmitting voice in Group Calls,
• when transmitting voice in Simplex Private Calls.
Blinking, when the End-to-End Encryption is enabled
• when receiving voice in Group Calls,
• when receiving voice in Simplex Private Calls,
• during encrypted Duplex Private Calls.
SDS End-to-End Encryption
Solid, when the E2E status of an SDS message, or the E2E status of a message recipient
address.
In High Security mode, when your radio processes only the encrypted information, this
icon is always visible in when you are in the messages menu (for example, Inbox).
Keys Locked — Indicates that keys are locked.
Non Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available when the radio:
• Is in the Local Site Trunking Mode.
• Attempts to connect to a gateway.
Not Secured Call — Air Encryption Unavailable
Alternately blinking, indicates that Air Encryption is not available when the radio:
• Is in TMO Mode.
• Communicates through a gateway.
Not Secured Call — Air Encryption Unavailable
Blinking, indicates that Air Encryption is not available in DMO Mode. The icon appears
after the PTT button is pressed.
Remote Control
Indicates that the radio is being remotely controlled and some commands are being exe-
cuted in the background. For example, when the radio is controlled via special SDS mes-
sages or triggered to send a GPS location report.
The icon is not visible in the Extra Zoom Mode.
Man-Machine Interface | 79
| | Send Feedback