Searching A Recording By Date - Date Search - Sony DCR-TRV30 Operating Instructions Manual

Searching a recording by date
– Date search
You can automatically search for the point where the recording date changes and start
playback from that point (Date search). Use a tape with cassette memory for
convenience. Use the Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
Before operation
•You can use this function only when playing back a tape with cassette memory.
•Set CM SEARCH in
ON).
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as follows:
(3) Press . or > on the Remote Commander to select the date for playback.
Your camcorder automatically starts playback at the beginning of the selected
date.
2
SEARCH
MODE
3
.
To stop searching
Press x.
64
to ON in the menu settings (p. 103). (The default setting is
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
no indicator
DA T E S E ARCH
1 SEP / 5 / 0 1
2 SEP / 6 / 0 1
3 DEC / 2 4 / 0 1
4 J AN / 1 / 0 2
5 F EB / 1 1 / 0 2
6 APR / 2 9 / 0 2
DA T E S E ARCH
1 SEP / 5 / 0 1
>
2 SEP / 6 / 0 1
3 DEC / 2 4 / 0 1
4 J AN / 1 / 0 2
5 F EB / 1 1 / 0 2
6 APR / 2 9 / 0 2
T PHOTO SCAN
MENU