Table of Contents
Advertisement
Superimposing a still image in a "Memory Stick" on a moving
picture – MEMORY MIX
Before operation
•Insert a tape for recording into your camcorder.
•Insert a recorded "Memory Stick" into your camcorder.
(1) Set the POWER switch to CAMERA or MEMORY.
(2) Press MEMORY MIX in the standby mode.
(3) Press MEMORY+/– to select the still image you want to superimpose.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
(5) Press the SEL/PUSH EXEC dial.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP in CAMERA mode, or press PHOTO in MEMORY mode
3
130
Make sure that the LOCK switch is set to the left (unlock) position.
The last recorded still image on "Memory Stick" appears on the lower part of
the screen as a thumbnail image.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
The mode changes as follows:
M.CHROM y M.LUMI y C.CHROM y M. OVERLAP
The still image is superimposed on the moving picture. Your camcorder
automatically returns to the standby mode.
to start recording.
2
MEMORY MIX
M. CHROM
4
5
100–0021
6
Still image
1
M. LUMI
100–0021
M. LUMI I I I • • • •
100–0021
M. LUMI I • • • • • •
100–0021
VCR
OFF(CHG)
CAMERA
MEMORY
Hide quick links:
Advertisement
Table of Contents
