Operation - Hoover HDW1- ME User Manual

OPERATION

3
Assembling your vacuum cleaner
Insert end of hose into vacuum cleaner inlet on main body.
Connect the metal extension tube and the hose handle together. All accessories can be fitted onto
extension tube. Connect the extension tube into the combination floor head. Ensure all parts are firmly
attached before use.
Important: Install the filter cover for using in dry mode, and take it out when sucking up water.
Turn the machine on and off
Insert power plug into mains socket. Turn on.
Turn vacuum cleaner on/off by pressing power switch on top of lid.
Important: Never use this vacuum cleaner with any of the filters removed as this could cause damage
to the internal components and void your warranty.
Important: Before using the vacuum cleaner in dry mode, ensure the foam filter and the filter cover
are installed.
How to use in dry mode
Insert the hose to the Vacuum cleaner
hose connector and can be used with or
turn anti-clockwise without a dust bag.
until fixed. If you would like to
use a dust bag, attach
the bag to the tube
inside the dust bin.
Control the suction For use on carpet
by adjusting the click rocker switch
air flow button forward. For use on
on the handgrip. hard floor click rocker
switch back.
How to use the blower function
To use the blower
function, insert end of
hose into blower function
on top of bin lid and
press 'On' button.
How to use in wet mode
Remove bin lid.
Unclip bin lid using
clips attached to side
of unit.
Attach squeegee tool
and turn the machine on.
OPERATION
Remove filter cover. Remove the dust bag
if present.
4