Table of Contents
Advertisement
Available languages
Available languages
OPERATION
4
PLEASE READ SAFETY INFORMATION BEFORE USE (p3)
Before plugging the cord into the electrical outlet, make sure the switch is in the 'off' position.
Hold the vacuum cleaner firmly when starting and in use.
Assembling your cylinder
Insert the end of the
hose into the unit.
Ensure the hose has
clicked into place.
How to use
Adjust the power for
different surfaces
as required.
Storage
Cable rewind button is located
at the rear of the machine.
After unplugging press the
cable rewind until the cord
is fully retracted.
Slot the metal telescopic
extension tube and
hose handle together.
All accessories can
be fitted to the end of
the metal telescopic
extension tube.
Carpets
Hard Floors
For use on carpets click rocker
switch forward. For use on hard
floors click rocker switch back.
For convenience there is a parking slot located at the
rear of the vacuum cleaner where the floor head and
tubes can be attached for storage and carrying.
Fully unwind the power
cord. A yellow mark
on the cord indicates
the recommended cord
length. Do not exceed
the cord beyond the
yellow mark.
Plug in and switch the
unit on by pressing the
power button.
Advertisement
Table of Contents
