Cisco UCS 5100 Firmware Manual page 9

2.2 Firmware Management with CLI
Complete these steps in order to view installed firmware in UCS through the CLI:
1. Log into Cisco UCS through the CLI.
2. Issue the scope system command.
3. Enter the show firmware expand command.
View Installed Firmware
F340−31−17−FI−A#
F340−31−17−FI−A# scope system
F340−31−17−FI−A /system # show firmware expand
UCSM:
Running−Vers: 1.0(1e)
Activate−Status: Ready
Fabric Interconnect A:
Running−Kern−Vers: 4.0(1a)N2(1.1e)
Running−Sys−Vers: 4.0(1a)N2(1.1e)
Startup−Kern−Vers: 4.0(1a)N2(1.1e)
Startup−Sys−Vers: 4.0(1a)N2(1.1e)
Act−Kern−Status: Ready
Act−Sys−Status: Ready
Bootloader−Vers:
scope firmware is a useful CLI command that allows you to:
•
Delete
•
Download
•
Scopeto download tasks
v1.2.0(06/19/08)