Selecting The Image Size - Sony DCR-TRV Operating Instructions Manual

Using a "Memory Stick" – Introduction

Selecting the image size

Still images:
DCR-TRV25/TRV27: You can select either of two image sizes.
DCR-TRV18:
Moving pictures:
You can select either of two picture sizes.
320 240 or 160
The default setting is 320 240.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MENU, then select STILL SET (still image) or MOVIE SET (moving
picture) in
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
dial.
The indicator changes as follows:
Still images*:
Moving pictures:
1
OFF(CHG)
MEMORY
MENU
* DCR-TRV25/TRV27 only
1152 864 or 640 480 (When the POWER switch is set to
CAMERA or VCR, the image size is automatically set to 640
480.)
The default setting is 1152 864.
640 480 only
112
with the SEL/PUSH EXEC dial (p. 179).
1152
320
VCR
LOCK
CAMERA
640
160
3
STILL SET*
MEMORY SET
1152
STILL SET
BURST
QUALITY
IMAGESIZE 1152 864
RETURN 640 480
REMAIN
17
[ MENU ] : END
4
STILL SET*
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE 640 480
RETURN
REMAIN
56
[ MENU ] : END
MOVIE SET
MEMORY SET
320
MOVIE SET
IMAGESIZE 320 240
REMAIN 160 112
RETURN
REMAIN
40sec
[ MENU ] : END
MOVIE SET
MEMORY SET
MOVIE SET
IMAGESIZE 160 112
REMAIN
RETURN
REMAIN
2min
[ MENU ] : END
109