Adjusting The Brightness Of The Lcd Screen; Adjusting The Viewfinder - Sony DCR-TRV Operating Instructions Manual

Recording a picture

Adjusting the brightness of the LCD screen

(1) Set the POWER switch to CAMERA, VCR or MEMORY (except DCR-TRV16).
Turn the SEL/PUSH EXEC dial to select LCD BRIGHT in
settings (p. 178), then press the dial.
(2) Turn the SEL/PUSH EXEC dial to adjust the brightness of the LCD screen with
LCD BRIGHT, then press the dial.
(3) Press MENU to make the menu settings disappear.
LCD screen backlight
You can change the brightness of the backlight. Select LCD B.L. in the menu settings
when using the battery pack (p. 178).

Adjusting the viewfinder

If you record pictures with the LCD panel closed, check the picture with the viewfinder.
Adjust the viewfinder lens to your eyesight so that the image in the viewfinder come
into sharp focus.
Set the POWER switch to CAMERA, VCR or MEMORY (except DCR-TRV16).
Lift up the viewfinder and move the viewfinder lens adjustment lever.
Viewfinder backlight
You can change the brightness of the backlight. Select VF B.L. in the menu settings
when using the battery pack (p. 178).
MENU
The viewfinder lens adjustment lever
in the menu
2
LCD/VF SET
LCD BRIGHT
[ MENU ] : END
29