Selecting The Still Image Quality Mode - Sony DCR-TRV Operating Instructions Manual

Using a "Memory Stick" – Introduction

Selecting the still image quality mode

You can select the image quality mode in still image recording.
The default setting is FINE. (DCR-TRV18 only).
The default setting is SUPER FINE. (DCR-TRV25/TRV27 only).
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press MENU, then select STILL SET in
(p. 179).
(3) Turn the SEL/PUSH EXEC dial to select QUALITY, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image quality, then press
the dial.
MENU
2
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
[ MENU ] : END
3
MEMORY SET
STILL SET
OFF BURST
QUALITY
IMAGESIZE
RETURN
[ MENU ] : END
with the SEL/PUSH EXEC dial
1
LOCK
4
SUPER FINE
FINE
STANDARD
REMAIN
5
VCR
OFF(CHG)
CAMERA
MEMORY
MEMORY SET
STILL SET
BURST
QUALITY STANDARD
IMAGESIZE
RETURN
REMAIN
17
[ MENU ] : END
107