Time Based Drying-Minutes; Time Display; Drying Steps; Iron Dry - Beko HITY 854310F User Manual

• Drying
This function enables drying of the laundry after
washing. Check with which programmes this
auxiliary function can be selected, from the
programme table.

5.12 Drying steps

5.12.1 Iron Dry

Drying is performed until the drying level
reaches Iron Dry step.

5.12.2 Cupboard Dry

Drying is performed until the drying level
reaches Wardrobe Dry step.
5.12.3 Extra Dry
Drying is performed until the drying level
reaches Extra Wardrobe Dry step.
C
INFORMATION
• Dryness level may change according
to the mixture, material types, amount
and dampness level of the laundry.
• Items which contain accessories such
as lace, tulle, stones, beads, spacer,
wire, etc. and high silk-content items
should not be dried in the machine.

5.12.4 Time based drying-minutes

In order to reach the desired drying level at low
temperature, you select any of 30, 90 and 150
minutes of drying periods.
C
INFORMATION
• When drying small amount of laundry
(up to maximum 2 pieces), timed-drying
steps in the Cottons or Synthetics drying
programmes should be selected.
• If the laundry is not at the desired
dryness level at the end of the drying
programme, timed-drying can be
selected to finish the process.
• When this function is selected, machine
performs drying for the adjusted time
irrespective of the drying level.
27 / EN

5.13 Time display

Remaining time for the completion of the
programme while it is running is displayed as
"01:30" in hours and minutes format.
C
INFORMATION
• Programme time may differ from the values
in section "Programme and consumption
table" depending on the water pressure,
water hardness and temperature, ambient
temperature, amount and the type of
laundry, auxiliary functions selected and
the changes at the mains voltage.

5.14 End Time

With the End Time function, the startup of
the programme can be delayed up to 24
hours. After pressing End Time button,
the programme's estimated ending time is
displayed. If the End Time is adjusted, End
Time light illuminates.
In order for the End Time function is activated
and the programme is completed at the end
of the specified time, you must press Start /
Pause button after adjusting the time. Start
/ Pause button stops flashing and remains
illuminated continuously.
If you want to cancel End Time function, press
End Time button until the End Time light turns
off or press On / Off button to turn off and on
the machine.
1. Open the loading door, place the laundry and
put detergent, etc.
2. Select the washing programme, temperature,
spin speed and, if required, the auxiliary
functions.
3. Set the end time of your choice by pressing
the End Time button. End Time light is
illuminated.
4. Press Start / Pause button. Time countdown
starts. ":" symbol in the middle of the end time
on the display starts flashing.
Washer-Dryer / User's Manual