Spin Speed Selection - Beko HITY 854310F User Manual

C
INFORMATION
• If you scroll to Cold Wash option and press
Temperature Adjustment button again,
the recommended maximum temperature
for the selected programme is displayed.
Press the Temperature Adjustment button
again to decrease the temperature.
Finally, Cold light indicating the cold wash option
appears on the display.
You can also change the temperature after the
washing has started. You can select the desired
temperature after washing starts but you must
do this before heating step starts.

5.7 Spin speed selection

Whenever a new programme is selected, the
spin speed recommended for the selected
programme is displayed on the Spin Speed
indicator.
C
INFORMATION
• It is possible that the recommended
spin speed value is not the maximum
spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed decreases
gradually.
Then, depending on the model of the product,
"Rinse Hold" and "No Spin" options appear on
the display.
C
INFORMATION
• Spin Speed Adjustment button works only
backwards. For example, when you want
to select 1000 rpm when the display shows
800 rpm, you need to press the button
for several times until you reach 1000
rpm by going backwards from 800 rpm.
22 / EN
C
INFORMATION
• Rinse Hold option is indicated with "
" symbol and No Spin option
is indicated with "
5.7.1 If you want to spin
your laundry after the
Rinse Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button. The
programme resumes. Machine drains the water
and spins the laundry.
If you want to drain the water at the end of the
programme without spinning, use No Spin
function.
C
INFORMATION
• In programmes that do not allow
spin speed adjustment, when
Spin Speed adjustment button is
pressed, spin speed light does not
change and the buzzer is heard.
You can also change the Spin Speed after the
washing starts. You can select spin speed by
pressing spin speed adjustment button after
washing has started but before the spinning
step.
5.7.2 Auxiliary function
selection for drying
When a new programme is selected, press
Auxiliary Function Selection button to adjust the
drying option that is suitable for the selected
washing programme.
C
INFORMATION
• In programmes that do not allow drying
adjustment, when Drying auxiliary function
button is pressed drying light does not
change and the buzzer is heard.
" symbol.
Washer-Dryer / User's Manual