Step 2: Charging The Battery Pack - Sony Handycam DCR-SR90E Operating Manual

Step 2: Charging the battery pack

You can charge the battery after attaching the
"InfoLITHIUM" battery pack (P series)
(p.93) to your camcorder.
• You cannot use an NP-FP30 battery pack with
your camcorder. (See the reverse side of the
battery pack for the model number.) Installing the
battery pack with excess force may lead to
camcorder malfunction such as deterioration in
battery pack performance or difficulty in
removing the battery pack.
CHG lamp
DC IN jack
Jack cover
Mains lead
To the wall socket
1
Slide the battery pack in the
direction of the arrow until it clicks.
14
POWER switch
DC plug
Battery
pack
AC Adaptor
2
Slide the POWER switch in the
direction of the arrow to set it to
OFF (CHG) (The default setting).
MODE
POWER
3
Connect the AC Adaptor to the DC
IN jack on your camcorder.
Open the jack cover to connect the AC
Adaptor.
Jack cover
4
Connect the mains lead to the AC
Adaptor and the wall socket.
The CHG (charge) lamp lights up and
charging starts.
ON OFF
(CHG)
Face down the
v mark to match
the v mark of
the camcorder.
CHG