Sony Handycam DCR-SR47E Handbook page 90

Connect the DC plug of the AC Adaptor to the

DC IN jack of your camcorder securely (p. 16).
C:13:  / C:32: 
Remove the power source. Reconnect it and

operate your camcorder again.
E:20:  / E:31:  / E:61:  / E:62:  /
E:91:  / E:94: 
A malfunction that you cannot service has

occurred. Contact your Sony dealer or local
authorized Sony service facility. Inform them
of the 5-digit code, which starts from "E. "
101-0001 (Warning indicator pertaining
to files)
Slow flashing
The file is damaged.

The file is unreadable.

(Warning on the hard disk of the
camcorder)
Fast flashing
The hard disk of the camcorder is full.

An error may have occurred with the hard

disk drive in your camcorder.
 (Battery level warning)
Slow flashing
The battery pack is nearly used up.

Depending on the operating environment or

battery conditions,  may flash, even if there
are about 20 minutes remaining.
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting

higher. Turn off your camcorder and leave it
for a while in a cool place.
Fast flashing
The temperature of your camcorder is

extremely high. Turn off your camcorder and
leave it for a while in a cool place.
(Low temperature warning)
Fast flashing
The temperature of your camcorder is

extremely low. Make the camcorder warm.
(Warning indicator pertaining to
"Memory Stick PRO Duo" media)
Slow flashing
Free spaces for recording images are running

out. For the type of "Memory Stick" media you
can use with your camcorder, see page 59.
No "Memory Stick PRO Duo" media is

inserted (p. 60).
Fast flashing
There are not enough free spaces for recording

images. After storing the images on other
media (p. 53, see Operating Guide too), delete
unnecessary images, or format the "Memory
Stick PRO Duo" media (p. 62).
The image data base file may be damaged.

Check the data base file by touching
(HOME) 
[REPAIR IMG.DB F.]  the recording
medium.
The "Memory Stick PRO Duo" media is

damaged.
(Warning indicators pertaining
to "Memory Stick PRO Duo" media
formatting)
The "Memory Stick PRO Duo" media is

damaged.
The "Memory Stick PRO Duo" media is not

formatted correctly (p. 62).
(Warning indicator pertaining to
incompatible "Memory Stick Duo" media)
Incompatible "Memory Stick Duo" media are

inserted (p. 59).
 (Warning indicator pertaining to
the write-protect of the "Memory Stick
PRO Duo" media)
Access to the "Memory Stick PRO Duo" media

was restricted on another device.
90
(MANAGE MEDIA) 