Sony DCR-SR85 Handycam&reg Operating Manual page 28

 Confirm the installation settings, then click
[Install].

Notes
Even if a screen prompting you to restart

your computer appears, you do not need to
restart it at this time. Restart your computer
after completing the installation.
It may take some time for the

authentication.
 Follow the on-screen instructions to install
the software.
Depending on the computer, you may

need to install third party software. If the
installation screen appears, follow the
instructions to install the required software.
 Restart the computer if required to complete
the installation.
 Remove the CD-ROM from the disc drive of
your computer.
To disconnect the USB cable
 Click the icon  [Safely remove USB
Mass Storage Device]  [OK] (Windows
2000 only) on the task tray on the bottom
right of the desktop of your computer.
 Touch [END]  [YES] on the screen of your
camcorder.
 Disconnect the USB cable.

Operating "Picture Motion Browser"
To start "Picture Motion Browser," click
[Start]  [All Programs]  [Sony
Picture Utility]  [PMB - Picture Motion
Browser].
For the basic operation of "Picture Motion
Browser," see "PMB Guide."
To display "PMB Guide," click [Start] 
[All Programs]  [Sony Picture Utility]
 [Help]  [PMB Guide].
 Tips
If the [USB SELECT] screen does not appear,

(HOME) 
touch
CONNECT].
US

(OTHERS)  [USB