Advertisement
Cisco - Cisco MCS-78XX Boot Error Codes
1727 - Slot x Drive Array-
New Logical Drive(s) Attachment
Detected. If more than 32
logical drives, this message
will be followed by:
Auto-configuration failed:
Too many logical drives.
1729 - Disk consistency
initialization
in progress RAID 4/5
performance may be lower
until Auto Reliability
Monitoring has completed
automatic parity consistency
initialization.
1730 - Fixed Disk 0 does not
support DMA Mode.
1731 - Fixed Disk 1 does not
http://kbase.cisco.com/paws/servlet/ViewFile/12138/mcs_boot.xml?convertPaths=1
was attached
when the
power drive
configuration
information
has been
updated to
add the new
logical
drives. The
None
maximum
number of
logical drives
supported is
32.
Additional
logical drives
are not added
to the
configuration.
Normal
None
operation.
Hard drive
None
error.
None
Hard drive
Page 11 of 13
Press F1 to
resume.
This message
is normal
following the
initial
configuration
of RAID 4 or
RAID 5 logical
drives. This
POST message
goes away and
performance of
the controller
improves after
the parity data
is initialized by
ARM (an
automatic
process that
runs in the
background on
the controller).
Run the
System
Configuration
Utility and
correct.
Run the
System
Configuration
10/2/2008
Advertisement
