Sony Handycam DCR-SR100 Operating Manual page 74

Recording images from a TV or VCR/DVD device (continued)
1
Connect your camcorder to the TV
or VCR/DVD device with the A/V
connecting cable (supplied) 1 or
the A/V connecting cable with S
VIDEO (optional) 2.
• Connect your camcorder to the output jacks
of a TV or VCR/DVD device.
2
If you are recording from a VCR/
DVD device, insert the video tape
or the DVD into the playback
device.
3
Slide the POWER switch to light up
the (PLAY/EDIT) lamp.
4
Touch
If you connected your camcorder to the
device which has the S VIDEO jack,
touch [SET] t [VIDEO INPUT] t
[S VIDEO] t
• Touch [SET] to change the recording mode
or adjust the volume.
• Touch [SET] t [
to display the remaining hard disk free space
indicator all the time.
5
Start playing the cassette or the
DVD on the play back device, or
select a TV program.
The image played on the connected
device appears on the LCD screen of your
camcorder.
6
Touch [REC] at the point you want
to start recording.
7
Touch
to stop recording.
74
t [REC CTRL].
.
REMAIN] t [ON]
at the point you want
8
Touch [END].
• There may be a time difference between the point
where you press [REC] and the actual point that
the recording starts/stops.
• You cannot record an image as a still image even
if you press PHOTO during recording.