Step 6: Setting The Date And Time - Sony Handycam DCR-SR100 Operating Manual

Step 6: Setting the date and time

Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder or slide the POWER switch.
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may be
cleared from the memory. In that case, charge the
rechargeable battery and then set the date and time
again (p.97).
Skip to step 4 when you set the clock for the
first time.
1
Touch
60min
2
Select
/ , then touch
60min
3
Select [CLOCK SET] with
then touch
22
POWER switch
t [SETUP].
CAMERA SET
PROGRAM AE
SPOT METER
EXPOSURE
OK
(TIME/LANGU.) with
.
DISP OUTPUT
SETUP ROTATE
A.SHUT OFF
CLOCK SET
ARE
DST SET
OK
LANGUAGE
.
4
Select the desired geographical
area with
5
Set [DST SET] to [ON] with
6
Set [Y] (year) with
touch
• You can set any year up to the year 2079.
7
Set [M] (month), [D] (day), hour and
minute, then touch
The clock starts.
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
• Refer to page 93 for information concerning
"World time difference."
• The recording date and time are not displayed
during recording, but are automatically recorded
onto the hard disk and displayed during playback
([DATA CODE], p.62).
• Instead of [DST SET], [SUMMERTIME] is
displayed for some models.
/ ,
/ , then touch
CLOCK SET
AREA26 GMT -5.0
New yor k , Bogota
DST OFF
DATE
2006 Y JAN M 1 D 12
, if necessary, then touch
.
CLOCK SET
AREA26 GMT -5.0
New yor k , Bogota
OFF
DST
DATE
2006 Y JAN M 1 D 12
.
00 AM
OK
/
.
/ , then
00 AM
OK
.