Step 2: Charging The Battery Pack - Sony Handycam DCR-PC330E Operation Manual

Step 2: Charging the
battery pack
You can charge the battery by attaching the
"InfoLITHIUM" battery pack (M series)
to your camcorder.
b Notes
• You cannot use batteries other than the
"InfoLITHIUM" battery pack (M series) (p. 119).
• Do not short-circuit the DC plug of the AC Adaptor
with any metallic objects. This may cause a
malfunction.
• Use a nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the wall
socket immediately if any malfunction occurs.
DC IN jack
DC plug
Mains lead
To the wall socket
Battery
AC Adaptor
1
Slide the battery release lever and
remove the battery terminal cover.
Battey release lever
2
Attach the battery pack by sliding it in
the direction of the arrow until it
clicks.
3
With the b mark on the DC plug
facing the jack cover, connect the AC
Adaptor to the DC IN jack on your
camcorder.
b mark
4
Connect the mains lead to the AC
Adaptor.
5
Connect the mains lead to the wall
socket.
,continued
13
Getting started