Related Manuals for ARC AT401
Summary of Contents for ARC AT401
-
Page 1: Remote Control Transmitter
2.4GHz 4 Channel Radio Remote Control Transmitter Models: AT401 / AT402 / AT501 / AT601 INSTRUCTION MANUAL Digital Proportional Radio Control System Taizhou Best Team Technology Limited www.rcmodel.net... -
Page 2: Safety Notes
SAFETY NOTES Please read through the instructions carefully before using this radio. Pay much attention to all precautions and warnings to ensure the safest operation. WARNINGS while the engine is running unless absolutely Do not fly in the rain or at night. Water can necessary. -
Page 3: Name And Handling Of Each Part
or cold, in direct sunlight, in high humidity, in Do not store the radio system in extreme heat high vibration environments or in dusty areas. NAME AND HANDLING OF EACH PART Elevator trim lever Throttle trim lever (model 1) (model 1) Throttle trim lever Elevator trim lever (model 2) - Page 4 and the left aileron is raised and the left aileron (Down Operation). is lowered and the helicopter banks to the right. When the aileron stick is moved to the left, the Throttle Control (CH3): When the throttle stick ailerons move in the opposite direction and the is pulled back, the engine throttle lever arm helicopter banks left.
- Page 5 their centered position during installation. The receiver case. Mount the switch harness to the servo connectors keyed prevent side of the fuselage away from the engine improper connection, but do pay close attention exhaust (refer to your model’s instruction when connecting them to the receiver. The manual).
-
Page 6: Using Other Functions
operates in the wrong direction, switch its When the throw is unsuitable (different from SERVO REVERSER switch (The direction of steering angle specified by the kit instruction operation can be changed without changing the manual), adjust it by changing the servo horn linkage). - Page 7 GLOSSARY The following defines the symbols and terms are used in this instruction manual. is the reverse side. Aileron (AIL): Control surface at the left and right side of the main wing of the model. It usually controls turning of the model. Rudder (RUD): Tail control surface that controls the direction of the aircraft.
Need help?
Do you have a question about the AT401 and is the answer not in the manual?
Questions and answers