Table of Contents
Advertisement
AUTOMATE
ARC 15 Channel Remote
AUTOMATE
| ARC 15 Channel Remotes feature a contemporary design and are
™
compatible with all ARC
whole home control.
FEATURES:
•
Multi channel selectable
•
Group Control
•
Leveling control
•
LCD Display
•
Slim magnetic wall mount
•
Hide unused channel function
™
LEVEL CONTROL
motors. This remote is perfect for individual shade, room and
™
433 MHz
Advertisement
Table of Contents
Related Manuals for ARC Automate
Summary of Contents for ARC Automate
- Page 1 ™ ARC 15 Channel Remote 433 MHz LEVEL CONTROL AUTOMATE | ARC 15 Channel Remotes feature a contemporary design and are ™ compatible with all ARC motors. This remote is perfect for individual shade, room and ™ whole home control.
-
Page 2: Table Of Contents
ADJUSTING LIMITS 7.1 Adjust upper Limit 7.2 Adjust lower Limit FAVORITE POSITIONING 8.1 Set a favorite position 8.2 Send shade to favorite position 8.3 Delete favorite position TROUBLE SHOOTING NOTES 2 | Automate Programming Instructions | 15 Channel Remote ™... -
Page 3: Technical Data / Pack Contents
1 x Wall Mounting Clip Cover 1 x Wall Mounting Clip Case 2 x Phillips Head Screw 2 x Wall Plug 3V - CR2450 Battery Programming Manual PROGRAMMING MANUAL (Not to scale) Programming Instructions | 15 Channel Remote | 3 Automate ™... -
Page 4: Safety
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Do not dispose of in general waste. 5005833 Please recycle batteries and damaged electrical products appropriately. 4 | Automate Programming Instructions | 15 Channel Remote ™... -
Page 5: Installation
Use supplied fasteners and anchors as needed to attach the base and cover. Switch is held in position magnetically and can be removed as desired. Safely dispose of any unused plugs. Programming Instructions | 15 Channel Remote | 5 Automate ™... -
Page 6: Functional Overview
When used to control a group of shades, they will all perfectly align to the same position. Press LEVELING DOWN to step via increments Press LEVELING UP to step via increments Hold LEVELING DOWN to scroll continuously Hold LEVELING UP to scroll continuously 6 | Automate Programming Instructions | 15 Channel Remote ™... -
Page 7: Selecting A Channel
Group control using channel "0" Channel "0" is pre-set to control ALL shades paired within your multi-channel remote. To create customized group channels, refer to section 6. Programming Instructions | 15 Channel Remote | 7 Automate ™... -
Page 8: Programming
Protocol selection This device can be configured to operate Rollease Acmeda line "EL" motors. (The default mode is ARC protocol.) To toggle between ARC & EL modes, follow the following steps. Hold P2 whilst inserting the Screen flashes x 5... -
Page 9: Using Pre-Existing Controller
Press STOP for 2 seconds CHANNEL DOWN for 5 seconds number of channels Display Response Display Response IMPORTANT Repeat steps and select 15 as desired number of channels to access all channels. Programming Instructions | 15 Channel Remote | 9 Automate ™... -
Page 10: Initial Set Up
For systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto lock mechanism when the shade is raised. 10 | Automate Programming Instructions | 15 Channel Remote... -
Page 11: Locking The Limit Setting Function
Remote Response Remote Display Approx. Approx. IMPORTANT The locked setting will prevent any multi-button functions. These include reversing direction before setting limits, limit setting and toggling between tilt and roller modes. Programming Instructions | 15 Channel Remote | 11 Automate ™... -
Page 12: Adjusting Limits
For systems using FT Motors & the Ultra Lock, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto lock mechanism when the shade is raised. 12 | Automate Programming Instructions | 15 Channel Remote... -
Page 13: Favorite Positioning
Motor Response Motor Response Send Shade to Favorite Position Approx. Delete Favorite Position Press P2 on controller. Press STOP on controller. Press STOP on controller. Motor Response Motor Response Motor Response Programming Instructions | 15 Channel Remote | 13 Automate ™... -
Page 14: Trouble Shooting
Motor will pair, but can not set Control must be unlocked Press and hold LOCK button for 5 limits. to set limits or perform any seconds, until locked state changes. multi-button functions. 14 | Automate Programming Instructions | 15 Channel Remote ™... -
Page 15: Notes
NOTES Programming Instructions | 15 Channel Remote | 15 Automate ™... - Page 16 16 | Automate Programming Instructions | 15 Channel Remote ™...
Need help?
Do you have a question about the Automate and is the answer not in the manual?
Questions and answers