Using Privacy Masking - Masking A Camera Image - Sony SNC-HMX70 Application Manual

Using Privacy Masking
Masking a Camera Image
The Privacy Masking function of SNC toolbox allows
you to mask parts of the camera image to be transmitted.
1
Select the camera to set a privacy mask from the
Device list.
2
Click Masking.
Using the Privacy Masking
The Privacy Masking screen enables you to set the
privacy mask position.
Click Masking to display the Privacy Masking screen.
Privacy Masking screen
PTZ function off:
Viewer
PTZ function on:
—
Viewer
A live image of the camera is displayed. You can specify
the position of the privacy mask in this area.
Numbers
The set mask number is displayed in the Viewer.
Frame
Display the frame of the set mask to distinguish the
mask area when the set mask is overlapped.
Panorama area
Display the panorama.
The set privacy mask is displayed by numbers on the
panorama. When the panorama is clicked, the camera
will focus on the place clicked.
Note
If a panorama image has not been created, the default
image is displayed.
PTZ controller
Allows you to pan, tilt and zoom the camera.
Viewer
Using the SNC toolbox
13