Registering In My Device - Sony SNC-HMX70 Application Manual

Notes
• When using a port number other than 80, check
with the network administrator first.
• Depending on the device type, the configurable
port number may be different.
6
Confirm that all items are correctly set, then click
OK.
If Setting OK is displayed, the IP address is
correctly assigned.
7
When setting is finished, to access the device
directly, double-click the device name in the list.
The viewer screen of the network device is
displayed on the Web browser.
Note
If the IP address is not set correctly, the viewer does not
appear after step 7. There is a possibility that the device
cannot be searched for. In that case, try to set the IP
address again.

Registering in My device

The device tree has three folders by default: Search
result, Error and My device.
The Search result folder and Error folder are fixed, so
you cannot edit the content or rename the folder.
The My device folder can be renamed, and you can add,
delete and move folders. Depending on the device type,
you may not be able to register in My device.
Search result folder
Displays devices detected by search.
Error folder
Displays devices that are not connected.
My device folder
You can sort and manage devices using any folder.
Adding a folder
1
Select the parent folder to which you want to add a
folder.
2
Right click the mouse and select Add Folder from
the displayed menu.
A folder is added. Enter a folder name of your
choice.
Registering a device
To register a device, follow the procedure below:
• Registering by Add Device Entry dialog
• Registering by drag & drop
• Registering by copy & paste
Registering by Add Device Entry dialog
1
Select the folder to register the device.
2
Right click the mouse and select Add Device Entry
from the displayed menu.
The Add Device Entry dialog appears.
3
Enter the following items:
Device name: Enter a device name of your choice.
Device address: Enter the address of the device to
register. Normally, select Single device. If there is
more than one camera in the specified IP address
range then select Multi device.
HTTP port No.: Normally, 80 should be selected.
When setting a value other than 80, select the
textbox and enter a port number.
9
Using the SNC toolbox