Summary of Contents for EFI Mimaki UJV500-160 Series
Page 1
This document bridges the gap between the Fiery XF documentation and the Mimaki UJV500-160 documentation. Refer to the Installation section before you connect the printer to a computer. The Operation section has information on profile generation and everyday use. Please refer also to the Operation Manual.
Page 2
Printer supplement In Color Tools, select the printer for which you want to create a calibration file. The calibration file forms the basis for creating a media profile. • You can access the ink layers settings via the “Media type” setting. •...
Page 3
Printer supplement This section applies only to printer models with white ink. For white printing, the print head is split into two bands - one band for process colors and one band for White ink. The print speed is much slower than for normal color printing. White adds another 100% of ink.
Page 4
Printer supplement • Print mode There are six ways to print White: Name Meaning The spot color of this name or alias from a separated document prints White. This is the Spot color WHITE_INK default mode. Inked image Every pixel which does not have CMYK = 0,0,0,0 on the printer side adds White Bounding box Every pixel in the image rectangle adds White.
Page 5
Printer supplement • Printing order Since White is opaque, the printing order is important. Setting Meaning Color on white Prints White as the foundation color, then prints the other colors on top. This setting is for printing on dark or metallic materials. White on color Prints White on top of other colors.