Additional Features; Communicating With The Panel - ADT Safewatch Pro 3000 System Manual

Safewatch Pro 3000 System Manual
Your system may be programmed for quick bypass. This allows for bypassing several protected zones
without having to enter the zone numbers individually. This feature is useful if, for example, you routinely
leave certain windows open when arming at night.
To active the Quick Bypass, enter your [security code] + [6] + [#]. Within a few moments, all open zones
will be displayed and automatically bypassed. Make sure that only those zones that you wish to leave
unprotected are bypassed and that you have not accidently left any zones unprotected. Now you can arm
your system as usual.

Additional Features

Using Device Commands
Your system may be programmed for this function. Please see the manufacturer's manual for a detailed
explanation of this feature.
Accessing Other Partitions and Multi-Partition Arming
For information about accessing other partitions, please see the user manual for a detailed explanation
of this feature.
Other System Information

Communicating with the Panel

Your system can be set up to communicate with you through:
Status beeps
Alarm sirens
Touchpad text
Pager information
Instructing the Panel
Not just anyone can walk up to a touchpad and operate your security system. Before the system will
process most commands, users are required to enter a pre-programmed 4-digit access code.
Keychain touchpads that are enrolled as part of the system do not require an access code, but are
usually kept in an individual's pocket or purse.
If you would rather use an actual key to arm and disarm the system, your security dealer can install a
special key and keyswitch in your home.
https://alpha.adt.com/help/63[11/12/2018 9:41:21 PM]