Data Code; Remote Ctrl - Sony Handycam DCR-HC85E Operation Manual

DATA CODE

GOFF
DATE/TIME
CAMERA DATA
REMAINING
GAUTO
ON

REMOTE CTRL

GON
OFF
Note
b
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
REC LED
GON
OFF
Select not to display date, time and the camera settings data during
playback.
Select to display the date and time during playback (p. 56).
Select to display the camera settings data during playback (p. 56).
Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch (play/pause).
Select to always display the remaining tape indicator.
Select when using the Remote Commander supplied with your
camcorder.
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
Select to turn on the camera recording lamp on the front of your
camcorder during recording.
Select this setting in the following recording situations. The camera
recording lamp will not light up during recording.
• When you do not want the subject to be nervous about being
recorded.
• When you are recording close to the subject.
• When the subject reflects the recording lamp.
,continued
85
Using the Menu