Sony Handycam DCR-HC85E Operation Manual page 42

[OVERLAP] (fade in only)
[WIPE] (fade in only)
[DOT FADER] (fade in only)
1
Slide the POWER switch to select the
CAMERA-TAPE mode.
2
Touch in the standby mode (to
fade in) or during recording (to fade
out).
3
Touch [FADER].
If the item is not displayed on the screen,
touch / . If you cannot find it, touch
[MENU], and select it from the
(PICT.APPLI.) menu.
60min STBY 0:00:00
FADER: OFF
BLACK
OFF
FADER
1/2
WHITE MOSAIC
FADER FADER
42
Recording
4
Touch the desired effect, then touch
.
When you touch [OVERLAP], [WIPE] or
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
60min STBY 0:00:00
MOSAIC
FADER
P-MENU
5
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the operation
Follow steps 2 and 3, then select [OFF] in step 4.
b Note
• You cannot use the FADER function together with:
– Self-timer
– Super NightShot plus function
– Color Slow Shutter function
– Digital effect
– [FRAME REC] (Frame recording)
– [SMTH INT.REC] (smooth interval tape
recording)
Fading in from still image on the
"Memory Stick Duo" – Memory overlap
You can fade in from the still image on the
"Memory Stick Duo" to the movie currently
being recorded on the tape.
Still image
1
Check that you have a "Memory Stick
Duo" with the still image to be
superimposed and a tape in your
camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
3
Touch .
Movie