Sony Handycam DCR-HC85E Operation Manual page 102

To erase programs
1
Follow steps 1 to 6 in "Recording the
selected scenes as programs" (p. 100),
then touch [UNDO].
2
Touch [DEL 1MARK] to delete the last
set program. Or, touch [ALL ERASE] to
erase all the programs.
3
[EXEC]
Touch
The programs are deleted.
To cancel this operation, touch [CANCEL].
b Note
• You cannot set starting point or ending point on a
blank section of the tape. If there is a blank section
in the picture set as a program, the total time may not
appear correctly.
• When you cannot operate the device correctly using
an i.LINK cable connection, select [IR] in step 11 on
p. 97, and set the [IR SETUP] code.
102
Dubbing/Editing
.