Sony Handycam DCR-HC85E Operation Manual page 30

3
Slide the POWER switch repeatedly
until the CAMERA-MEMORY lamp
lights up.
The selected recording folder is displayed.
4
Press and hold PHOTO lightly.
You will hear a light beeping sound when
the focus and brightness settings are
adjusted. Recording does not start at this
point.
The indicator
stops flashing.
60min
FINE
1600
101
*The number of images that can be recorded
varies depending on the image quality setting
and the recording environment.
5
Press PHOTO fully.
A shutter sound is heard. When bars of
disappear, the image is recorded on
the "Memory Stick Duo."
To check the most recently recorded
image – Review
Touch .
Touch to return to standby.
To delete the image, touch
To cancel deleting, touch [NO].
30
Recording
Slide the POWER
switch while pressing
the green button.
The number of images
that can be recorded.*
8
P-MENU
, then [YES].
To turn the power off
Slide the POWER switch up to the OFF (CHG)
position.
To record still images continuously –
Burst
Select the (MEMORY SET) menu,
[STILL SET], then [
You can record images continuously in a time
interval of about 0.5 to 0.08 seconds.
Indicators displayed during recording
60min
101
A Recording folder
B Image size
(1600 × 1200) or
1600
C Quality
([FINE]) or
D Personal Menu button (p. 61)
E Review button (p. 30)
z Tip
• When you press PHOTO on your Remote
Commander, the image displayed on the screen at
that timing is recorded.
• The recording time, date, and the camera settings
data are recorded automatically on the recording
media without being displayed on the screen. You
can view this information during playback by
selecting [DATA CODE] in the menu setting
(p. 56).
• The recording angle is wider than that of the
CAMERA-TAPE mode.
BURST] (p. 69).
FINE
1600
P-MENU
(640 × 480)
([STANDARD])