Troubleshooting - Hoover Freejet Evo User Manual

1. Run the unit until the batteries are completely empty.
2. Release the handheld unit from the main body of the cleaner. [6]
3. Press the dust container release button and remove the dust container. [9]
4. Remove 2 screws and open the unit. [17]
5. Disconnect the cables and remove the batteries from the housing. [18]
NOTe: Should you experience any difficulties in dismantling the unit or for more detailed information
about treatment, recovery and recycling of this product, please contact your local city office, your
household waste disposal service.
TROUbLE ShOOTING
Should you have any problem with you cleaner, follow this simple check list before calling the Hoover
Customer Service Centre:
A. Cleaner does not switch on.
Check if the cleaner is charged.
B. Loss of suction or no suction
Empty the dust container and wash the
Remove nozzle and check for any blockages in the duct.
C. Batteries cannot be charged.
This may be a result of very long storage periods (over half year).
Contact Hoover customer service to arrange battery replacement.
If the problem persists contact the Hoover customer service centre.
IMPORTANT INFORMATION
Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or
direct from Hoover. When ordering parts always quote your model number.
Your guarantee
The guarantee conditions for this appliance are as defined by our representative in the country in which
it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be produced when making any claim under the terms of
this guarantee.
IMPORTANT: The battery of this cleaner is guaranteed for 6 months from the date of purchase. After 6
months the customer is liable for the cost of a new battery.
Subject to change without notice.
*Nozzle design may vary according to models
filter.
**Motorized Nozzle only
5
GB