Searching For A Scene By Date Of Recording (Date Search); Playback - Sony Handycam DCR-HC36E Operating Manual

4
Press PLAY 4.
Playback starts from the point
designated "0:00:00" on the tape
counter.
To cancel the operation
Press ZERO SET MEMORY 5 again
before rewinding.
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly if
there is a blank section between recorded
sections on the tape.
Searching for a scene by date of
recording (Date search)
You can locate the point where the
recording date changes.
1
Slide the POWER switch
repeatedly to turn on the PLAY/
EDIT lamp.
2
Press SEARCH M. 2.
3
Press .(previous)/>(next)
3 to select a recording date.
60
min
0:00:00:00
30
min
DATE -01
SEACH
P.MENU
To cancel the operation
Press STOP 4.
• The Date search will not function correctly
when there is a blank section between recorded
sections on the tape.
37