How To Order Additional Products; Communications Port - Decatur Electronics GHD User Manual

system Also, we will add COD and a 10% handling fee to the repair
bill for out-of-warranty repairs
The customer is responsible for all shipping charges to the Decatur
service location Decatur does not accept incoming COD shipments
Decatur Electronics will pay the freight (up to $10 00 US) for shipping
the system from the repair facility to the customer, providing the
system is still under warranty We will charge the customer for any
shipping charges above the initial $10 00 If you want to ship your
package express or next day air, we will invoice you for these freight
charges
If your radar is out of warranty and you would like to know the cost
of repair prior to the actual repair work being performed, Decatur
would be happy to give you a repair estimate To obtain an estimate,
request it either on the paperwork you submit with the radar when
you send it in for service or when you obtain a Return Authorization
(RA) number Decatur provides estimates only upon request
The initial charge for an estimate is currently $50 00 US per unit if
your radar gun is not under warranty plus the return shipping and
handling fees If, after reviewing the estimate cost, you decide not to
have your radar repaired, you will be invoiced $50 00 as a minimum
charge If you decide to have your radar gun repaired, you do not
owe the estimated charge (the charge is waived) and only pay the
amount stated in the estimate
36

15. How to Order Additional Products

You can order upgrades to the GHD or to the SCOUT (when available)
as well as cases, power supplies, tripods, and tuning forks To see
product descriptions or order products, see the Decatur Electronics
Web site at www DecaturRadar com or call the sales ofce at
800 428 4315

16. Communications Port

The RS232 communications port (COM) is located on the bottom
of the handle right next to where the power cable plugs in The
serial communication has the following characteristics (8:n:1) and is
transmit only:
One (1) start bit
Eight (8) data bits
No parity
One (1) stop bit
Transmission at 1200 baud
The unit transmits data as ASCII symbols in the following digit
sequence:
ASCII [hundreds][tens][ones]
Carriage return<CR>
(<CR> = ASCII decimal value 13)
The radar unit sends the data in this sequence when the TARGET
speed display changes When you press the LOCK button, the radar
transmits the following digital sequence:
[hundreds][tens][ones]<CR>
(<CR> = ASCII decimal value 13)
25/Aug/2010 25/Aug/2010
37