Care, Cleaning, And Storage; Specifcations; 10 1 Antenna Parameters K-Band; 10 3 Speed Range Parameters - Decatur Electronics GHD User Manual

9. Care, Cleaning, and Storage

• Avoid spilling food, beverages and other liquids on the radar
device
• When you are not using or transporting the device, store it in its
original packaging
• To clean the radar device, dust it with a soft clean cloth, which is
free of cleaning solutions

10. Specifcations

10.1 Antenna Parameters
K-Band
IACP
Nominal transmission frequency
Nominal horizontal beamwidth
Polarization
Nominal microwave power output
Maximum aperture power density
10.2 Environment
Ambient operating temperatures
Maximum humidity
10.3 Speed Range Parameters
Speed Display Ranges
kph
10.4 Power Consumption Parameters
GHD
Supply voltage range
Low voltage trip with antenna on
30
Type III
24 150 GHz
12°
Linear
(Vertical)
7 mW
<1 mW/cm2
-30ºC to +70ºC
90% relative humidity
(non-condensing) at 37°C
Minimum Maximum
20 337
8 5VDC – 16 5VDC
8 5VDC
25/Aug/2010
SCOUT
Supply voltage range (with power cord)
Low voltage trip with antenna on
(with power cord)
Battery supply voltage
Battery low voltage trip w/antenna on
GHD AND SCOUT when using power cord
All currents measured at 13 8VDC with backlight on and speaker on
(volume = 4)
Standby (antenna of )
Antenna ON (no targets displayed)
Antenna ON ( "55" target displayed)
Antenna OFF (segment check "888 888")
Antenna ON (segment check "888 888")
10.5 Accuracy
The speed calculations of any radar Decatur Electronics produces are
100% accurate The display precision is as follows:
± 1 unit of measure in stationary mode of operation
25/Aug/2010
8 5VDC - 16 5VDC
8 5VDC
7 2VDC
6 3VDC
105 amperes
170 amperes
172 amperes
116 amperes
180 amperes
31