Manual Watering; Suspend Manual Watering; Battery Life Indicator - Hunter Smart Valve Controller Owner's Manual And Installation Instructions

Manual Watering

To activate a Manual Watering:
1. Press the button once to display the current time
of day.
2. Press and hold the
the Manual Watering icon.
3. Use the or button to adjust the manual water run
time from 1 minute to 4 hours.
4. Release the buttons and the controller will count down
10 seconds before activating the manual cycle.
5. The flashing sprinkler icon will appear on the display
when watering is occurring.

BATTERY LIFE INDICATOR ...............................................................................

The battery life status icon
the remaining life of the installed battery without having to
remove the battery from the controller. A battery life status
icon will appear along with the time and day on the display.
A fully charged battery will show all three segment of the
battery dark . As the battery is expended, the segments
will appear as outlines
button for two seconds to display
is a quick way to determine
.
To suspend Manual Watering:
1. Press the button until the
displayed. Wait 4 seconds and "OFF" will appear on the
display.
2. Press the button again and the SVC will water based
upon the current program.
System Off icon is
9