Ryobi ROM-65P Owner's Operating Manual page 25

DRIVE / SPEED CHANGE LEVER (18)
- Selects machine forward/reverse movement.
This lever has 6 positions, corresponding to 4
forward gears
reverse gear "R".
- To switch from one gear to another, at mid stroke
lever to the required position.
Rotation to "START"
engine start.
If returned to
gine.
By giving the handle a good pull, the engine
starts. After pulling, re-accompany the handle
into its housing to facilitate automatic cable
rewinding.
Engine with power start also feature ca-
ble start.
(15)
Reduced or increases engine revs.
, neutral position "N" and
move the
position – automatic
"I" position .
position – switches off en-
engine minimum speed
engine top speed
Lifts or lowers the blade deck and the-
Th here are 4 possible height adjustments.
lever to the required position.
When the button is released, the lever remains in
the selected position.
Cutting heights: see technical data table.
BLADE ROTATION ENGAGEMENT LEVER
starts or stops blade rotation.
-
- Blade engaged
- Blade disengaged
conditions, the engine switches off if it is running,
or else cannot be started.
6 Machine safety
If the machine has not been used for a long time,
order to be able to start and use the machine sa-
SAFETY SYSTEM OPERATION CHECK
cated in paragraph 6. Make sure that to each
operation corresponds the indicated effect.
- 24 -
-