Operation - Ryobi ROM-65P Owner's Operating Manual

g)
ged.
h)
blade, the blade fastening screws and the
cutters are not worn or damaged. Replace
fastening screws in complete series to maintain
proper balancing. Repairs and maintenance of
sed after-sales centre.

OPERATION

a) HAZARD! Do not operate the engine
in a secluded or restricted area where
b)
c)
Before starting the engine, disconnect the
blade, place the gearshift in "neutral" (N) and
engaged the parking brake.
d)
As far as possible, avoid using the lawnmower
on wet grass.
e)
Check the limits indicated in the manual.
CAUTION - Risk of overturning on steep
gradients.
# Do not use the machine on lawns with gra-
dients of more than 25% (14°).
# Do not use the machine on lawns with side
gradients above 15% (8°).
> 25%
f) Remember, there is no such thing as a "safe"
gradient. Moving on sloped lawns requires
To prevent overturning:
slopes;
- speed must be reduced on slopes and sharp
bends;
- never move down slopes with the gear shift
in neutral (N); engage a lower gear;
- be careful of mounds, bumps and hidden
hazards;
> 15%
> 25%
-
up or down.
g)
slopes.
h)
lawns and when the lawnmower is transported
to and from the work area.
i)
-
j)
to not tamper to increase the engine speed. If
the speed of the engine is too high, this could
cause personal injuries.
k) Disengage the blade and drive control before
starting the engine.
l)
unloading opening.
m)
Before leaving the driving seat:
- place the gearshift in neutral (N) and engage
- disengage the blade and lower the blade
deck;
n)
inspection, cleaning and servicing
operations on the machine, before
unblocking the grass unloading pipe,
stop the engine, take out the ignition
manual.
and repair operations on the cutting
parts, stop the engine and take out
the spark plug wire, and keep the
prevent accidental starting.
de and all the moving parts to come
to a halt before touching them. The
blade will continue turning for some
STOP
time after switching off the engine or
disabling the blade control.
- 17 -
-
-