Disassembly And Assembly Instructions; Remove The Rear Cover; Remove The Ac Inlet; Remove The P-Board - Panasonic TX-P50C2B Service Manual

9 Disassembly and Assembly Instructions

9.1.

Remove the Rear cover

1. See PCB Layout (Section 3)
9.2.

Remove the AC inlet

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screw (×1
9.3.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P7, P9, P11, P34 and
P35).
3. Remove the screws (×9
) and remove the AC inlet.
) and remove the P-Board.
9.4. Remove
cover and the Side shield metal
1. Remove the screws (×2
2. Remove the Side terminal cover.
3. Remove the Side shield metal.
24
the Side terminal
, ×1 , ×1
).