Panasonic TX-P50C3E Service Manual

Panasonic TX-P50C3E Service Manual

Hide thumbs Also See for TX-P50C3E:

Advertisement

TX-P50C3E
Model No.
TX-P50C3J
TX-PR50C3
GPF14D-E Chassis
© Panasonic Corporation 2011.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.PCZ1102004CE
Plasma Television

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic TX-P50C3E

  • Page 1 ORDER NO.PCZ1102004CE Plasma Television TX-P50C3E Model No. TX-P50C3J TX-PR50C3 GPF14D-E Chassis © Panasonic Corporation 2011. Unauthorized copying and distribution is a violation of law.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 11.5. Wiring (4) -------------------------------------------------- 44 1.1. General Guidelines ----------------------------------------3 12 Schematic Diagram 13 Printed Circuit Board 1.2. Touch-Current Check--------------------------------------3 14 Exploded View 2 Warning --------------------------------------------------------------4 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------4 2.2.
  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.
  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
  • Page 6: Service Navigation

    3 Service Navigation 3.1. PCB Layout Board Name Function Board Name Function Power Supply Data Driver (Lower Right) Non serviceable. Data Driver (Lower Left) P-Board should be exchanged for service. Scan Drive Main AV input, processing Sustain Drive Remote receiver, Power LED, C.A.T.S sensor...
  • Page 7: Applicable Signals

    3.2. Applicable signals COMPONENT (Y, P ), HDMI * Mark: Applicable input signal Signal name COMPONENT HDMI 525 (480) / 60i, 60p 625 (576) / 50i, 50p 750 (720) / 60p, 50p 1,125 (1,080) / 60i, 50i 1,125 (1,080) / 60p, 50p, 24p PC (from HDMI terminal) Applicable input signal for PC is basically compatible to HDMI standard timing.
  • Page 8: Specifications

    Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264)) DVB-C Digital cable services (MPEG2 and MPEG4-AVC(H.264)) • Check the latest information on the available services at the following website. (English only) http://panasonic.jp/support/global/cs/tv/ Receiving Systems / Band name (R) PAL D, K, SECAM D, K VHF R1 - R2...
  • Page 9 Note • Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. • This equipment complies with the EMC standards listed below. EN55013, EN61000-3-2, EN61000-3-3, EN55020...
  • Page 10: Technical Descriptions

    3 seconds. TV will be forced to the factory shipment setting after this SELF CHECK. 5.1.3. Model and Keys: Model No. Keys One-to-One CI Plus DTCP-IP (For USB Rec.) TX-P50C3E None None TX-P50C3J None None TX-PR50C3 None None None...
  • Page 11: Service Mode

    6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [0] button of the remote control three times within 2 seconds. 6.1.2.
  • Page 12 DOUBLE FIXED 1% WINDOW VERTICAL LINE SCROLL ON/OFF OR WHITE R/G/B/W ROTATION HALF FIXED ALL WHITE ALL WHITE WITH COUNT DISPLAY SRV-TOOL See Service tool mode Destination TX-P50C3E/J TX-PR50C3 Check sum d295 d214 *1 OPT1 00000100 10000100 *2 OPT4 00010000...
  • Page 13: Option - Mirror

    6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.
  • Page 14: Hotel Mode

    6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Hotel Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Initial INPUT Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched press [AV] button of the remote control three times within...
  • Page 15: Data Copy By Sd Card

    6.5. Data Copy by SD Card 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
  • Page 16 6.5.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
  • Page 17 6.5.4. Data copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.
  • Page 18: Troubleshooting Guide

    7 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 7.1. Check of the IIC bus lines 7.1.1. How to access 7.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
  • Page 19: Power Led Blinking Timing Chart

    7.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...
  • Page 20: No Picture

    7.4. No Picture...
  • Page 21: Local Screen Failure

    7.5. Local screen failure Plasma display may have local area failure on the screen. Fig-1 is the possible defect P.C.B. for each local area. Fig-1...
  • Page 22: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Remove the Rear cover 8.4. Remove Side terminal cover 1. See PCB Layout (Section 3) 8.2. Remove the AC inlet 1. Remove the screws (×2 2. Remove the Side terminal cover. Caution: To remove P.C.B. wait 1 minute after power was off for dis- charge from electrolysis capacitors.
  • Page 23: Remove The A-Board

    8.6. Remove the A-Board 8.8. Remove the SN-Board 1. Remove the Tuner unit. (See section 8.5.) 1. Disconnect the flexible cables (SN21, SN22, SN23, SN24, SN25 and SN26) connected to the SN-Board. 2. Remove the screws (×2 ) and remove the A-Board. 2.
  • Page 24: Remove The Stand Bracket And The Hanger Metals

    8.10. Remove the Stand bracket and 8.11. Remove the C1-Board the Hanger metals 1. Remove the Hanger metal R and the Stand bracket. (See section 8.10.) 1. Remove the Plasma panel section from the servicing 2. Remove the Flexible cable holder fastening screws (×8 stand and lay on a flat surface such as a table (covered by a soft cloth) with the Plasma panel surface facing 3.
  • Page 25: Remove The Plasma Panel Section From The Cabinet Assy

    8.13. Remove the Plasma panel sec- 8.14. Remove the Glass holders tion from the Cabinet assy 1. Remove the Cabinet assy. (See section 8.13.) 2. Remove the screws (×7 1. Remove the Plasma panel fastening screws (×4 ) and 3. Remove the Glass holder top. remove the Cabinet assy.
  • Page 26: Replace The Plasma Panel

    8.16. Replace the Plasma panel Caution: A new Plasma panel itself without Hanger metals is fragile. To avoid the damage to new Plasma panel, carry a new Plasma panel taking hold of the Hanger metals after assembling the Hanger metals and the Stand bracket. 1.
  • Page 27: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Adjustment 9.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW or HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. LOW or HIGH will be displayed. 2.
  • Page 28 9.1.2. Sub-Contrast adjustment Name of measuring instrument Connection Remarks RF generator Base Band signal generator HD signal generator Steps Remarks Connect IIC cable (bus controller-cable) after banner OSD appear. Note: And after SRQ-L, begin an adjustment 2 seconds later. Sub-contrast adjustment is unadjusted for AV/ HD input.
  • Page 29 Steps Remarks Another procedure Connect IIC cable (bus controller-cable) after banner OSD appear. And after SRQ-L, begin an adjustment 2 seconds later. Adjustment of HD system 1. At 1080i 100% Full White or Split colour bar receive component signal, as shown below. 2.
  • Page 30 9.1.3. White balance adjustment The adjusting method is different according to the PEAKS EEPROM version. [copy adjustment] : Peaks EEPROM ver.1.00- [Differential and copy adjustment] : Peaks EEPROM ver.1.01- Name of measuring instrument Connection Remarks W/ B pattern Panel surface Color analyzer (Minolta CA-100 or equivalent) Steps...
  • Page 31 Steps Remarks [Differential and copy adjustment] Execute adjustment for color temp. [NORMAL], and set data for color temp. [COOL], [WARM] by data shift WB of HD (or PAL) copies the adjustment data from an adjusted format side. Note: The adjustment does only color temp. [NORMAL]. A adjustment value difference from [NORMAL] is written to EEPROM as for [COOL] and [WARM] by operat- ing a [OK] key.
  • Page 35: Block Diagram

    10 Block Diagram 10.1. Main Block Diagram MAIN AV INPUT,PROCESSING HDMI1,2 CI SLOT TMDS DATA HDMI I/F RECEIVER SD CARD DATA SD CARD SD CARD SIF I/F TUNER I/F PEAKS-sLD2 Parallel_ TS(CI) IFD_OUT TS I/F SIF_OUT DDR3 DDR3 I/F TUNER Y/PR/PB AV IN RGB_CVBS...
  • Page 36: Block (1/4) Diagram

    10.2. Block (1/4) Diagram SPEAKER_L SPEAKER_R D1006 DIGITAL JK1053 JK1020 JK1021 AUDIO TU4801 SD CARD ANT IN HDMI IN 1 HDMI IN 2 MAIN AV INPUT,PROCESSING TUNER SD3.3V Q4512 DMD_ IIC0 IC8604 SD3.3V IC4900 AUDIO AMP SOUND15V SUB5V SUB3.3V Q5172 X8300 24.576MHz AV1_VIN...
  • Page 37: Block (2/4) Diagram

    10.3. Block (2/4) Diagram MAIN AV INPUT,PROCESSING IC9300 PD5L VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA Sub Filed Processor P+3.3V IC9304 P+3.3V P+3.3V SI/SO IIC0 SOS8_SS FLASH I/F FLASH SOS8_SS P_S0 P_S0 DATA DRIVER CONTROL P_S1 DISCHARGE CONTROL P_S1...
  • Page 38: Block (3/4) Diagram

    10.4. Block (3/4) Diagram POWER SUPPLY COLD COLD AC CORD Fuse AC Vin PHOTO (Live) Detection COUPLER (Neutral) FILTER STANDBY SS11 VOLTAGE CONVERTER T101 FET SW Vsus P+15V FET SW Relay F15V for prevention of inrush current F15V STB5V Drop IC SOUND15V OCP/OVP P+15V...
  • Page 39: Block (4/4) Diagram

    10.5. Block (4/4) Diagram SUSTAIN DRIVE SCAN DRIVE TPVSUS TPVSUS Vsus L16011 Vsus P+15V D16618 MAIN H Q16607 IC16131 Q16001 CERS IC16784,85 IC16684 Q16003 PC16897 BUFFER CPH1 IPD CIRCUIT BUFFER Q16601 TPVAD T16471 VAD GEN. TPSS1 IC16501 SHUNT REG Q16401 BUFFER PLASMA Q16402...
  • Page 41: Wiring Connection Diagram

    11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Wiring (1)
  • Page 42 11.3. Wiring (2)
  • Page 43: Wiring (2)

    11.4. Wiring (3)
  • Page 44: Wiring (3)

    11.5. Wiring (4)
  • Page 45 Model No. : TX-P50C3E/J, PR50C3 Schematic Diagram Note...
  • Page 46 Model No. : TX-P50C3E/J, PR50C3 Replacement Parts List Note...
  • Page 47 Model No. : TX-P50C3E/J, PR50C3 A-Board (1/14)
  • Page 48 Model No. : TX-P50C3E/J, PR50C3 A-Board (2/14)
  • Page 49 Model No. : TX-P50C3E/J, PR50C3 A-Board (3/14)
  • Page 50 Model No. : TX-P50C3E/J, PR50C3 A-Board (4/14)
  • Page 51 Model No. : TX-P50C3E/J, PR50C3 A-Board (5/14)
  • Page 52 Model No. : TX-P50C3E/J, PR50C3 A-Board (6/14)
  • Page 53 Model No. : TX-P50C3E/J, PR50C3 A-Board (7/14)
  • Page 54 Model No. : TX-P50C3E/J, PR50C3 A-Board (8/14) S-10...
  • Page 55 Model No. : TX-P50C3E/J, PR50C3 A-Board (9/14) S-11...
  • Page 56 Model No. : TX-P50C3E/J, PR50C3 A-Board (10/14) and K-Board S-12...
  • Page 57 Model No. : TX-P50C3E/J, PR50C3 A-Board (11/14) S-13...
  • Page 58 Model No. : TX-P50C3E/J, PR50C3 A-Board (12/14) S-14...
  • Page 59 Model No. : TX-P50C3E/J, PR50C3 A-Board (13/14) S-15...
  • Page 60 Model No. : TX-P50C3E/J, PR50C3 A-Board (14/14) S-16...
  • Page 61 Model No. : TX-P50C3E/J, PR50C3 C1-Board S-17...
  • Page 62 Model No. : TX-P50C3E/J, PR50C3 C2-Board S-18...
  • Page 63 Model No. : TX-P50C3E/J, PR50C3 SN-Board (1/6) S-19...
  • Page 64 Model No. : TX-P50C3E/J, PR50C3 SN-Board (2/6) S-20...
  • Page 65 Model No. : TX-P50C3E/J, PR50C3 SN-Board (3/6) S-21...
  • Page 66 Model No. : TX-P50C3E/J, PR50C3 SN-Board (4/6) S-22...
  • Page 67 Model No. : TX-P50C3E/J, PR50C3 SN-Board (5/6) S-23...
  • Page 68 Model No. : TX-P50C3E/J, PR50C3 SN-Board (6/6) S-24...
  • Page 69 Model No. : TX-P50C3E/J, PR50C3 SS-Board (1/2) S-25...
  • Page 70 Model No. : TX-P50C3E/J, PR50C3 SS-Board (2/2) S-26...
  • Page 71 Model No. : TX-P50C3E/J, PR50C3 A-Board (Foil side) S-27...
  • Page 72 Model No. : TX-P50C3E/J, PR50C3 A-Board (Component side) S-28...
  • Page 73 Model No. : TX-P50C3E/J, PR50C3 K-Board S-29...
  • Page 74 Model No. : TX-P50C3E/J, PR50C3 C1-Board S-30...
  • Page 75 Model No. : TX-P50C3E/J, PR50C3 C2-Board S-31...
  • Page 76 Model No. : TX-P50C3E/J, PR50C3 SN-Board (Foil side) S-32...
  • Page 77 Model No. : TX-P50C3E/J, PR50C3 SN-Board (Component side) S-33...
  • Page 78 Model No. : TX-P50C3E/J, PR50C3 SS-Board S-34...
  • Page 79 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks N0AE5JK00007 CIRCUIT BOARD P 1 PAVCCZ A-P50C3E CIRCUIT BOARD A 1 (RTL)PAVCCZ P50C3E A-P50C3J CIRCUIT BOARD A 1 (RTL)PAVCCZ P50C3J A-PR50C3 CIRCUIT BOARD A...
  • Page 80 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C3136 F1G1H5610004 C 560 pF 50 V 1 PAVCCZ C3139 F1G1H5610004 C 560 pF 50 V 1 PAVCCZ C3140 F1G1H5610004 C 560 pF 50 V...
  • Page 81 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C5003 F1H1C105A145 C 1 uF 16 V C5012 EEEHB1C101UP C 100PF, J, 16V C5013 ECJ1VB1A105K C 1UF, 10V C5014 ECJ1VB1A105K C 1UF, 10V...
  • Page 82 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8128 F1J0G2260001 C 22 UF 4 V C8200 F1G1C104A077 C 0.1UF 16V C8205 F1G1C104A077 C 0.1UF 16V C8206 F1G1C104A077 C 0.1UF 16V C8207...
  • Page 83 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9104 F1G1C104A077 C 0.1UF 16V C9105 F1G1C104A077 C 0.1UF 16V C9106 F1G1H5610004 C 560 pF 50 V 1 PAVCCZ C9108 F1G1C104A077 C 0.1UF 16V...
  • Page 84 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC5002 C0DBGHC00003 IC5251 C0CBCBC00227 IC8000 MN2WS0175C 1 PAVCCZ IC8100 C0DBAYY00715 IC8201 C3ABTY000025 IC8403 C0JBAZ003032 1 PAVCCZ IC8404 C0DBZYY00382 1 PAVCCZ IC8604 C0DBAGF00030 IC8701 C0DBAYY00931...
  • Page 85 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks L9302 J0JHC0000117 CHIP INDUCTOR L9303 J0JHC0000117 CHIP INDUCTOR L9800 G1C6R8MA0445 INDUCTION COIL 1 PAVCCZ PA2011 K5H5022A0031 FUSE Q0900 DSA200100L TRANSISTOR Q2810 B1ABCE000015 TRANSISTOR...
  • Page 86 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R3001 D0GA102JA023 M1KOHM, J.1/16 W R3002 D0GA122JA023 M 1.2KOHM, J,1/16W R3014 D0GA221JA023 M220 OHM, J.1/16 W R3121 EXB28V221J M220 OHM 1/32 W R3129 D0GA104JA023 M100KOHM, J.1/16 W...
  • Page 87 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R4800 D0GA103JA015 M 10KOHM,J,1/16W R4910 D0GA472JA023 M 4.7KOHM, J,1/16W R4911 D0GA102JA023 M1KOHM, J.1/16 W R4913 D0GA103JA015 M 10KOHM,J,1/16W R4914 EXB28V220J M 22 OHM 1/32 W...
  • Page 88 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8221 D0GA103JA015 M 10KOHM,J,1/16W R8223 EXB28V330J M 33 OHM 1/32 W R8224 D1BA1001A014 M 1KOHM,J. 1/16 W R8225 D1BA1001A014 M 1KOHM,J. 1/16 W...
  • Page 89 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8651 D0GA103JA015 M 10KOHM,J,1/16W R8652 EXB28V103JX M 10KOHM 1/32 W R8704 D1BB5362A055 M53.6KOHM,J.1/10W 1 PAVCCZ R8705 D1BB1002A055 M 10KOHM,J.1/10W R8706 D0GA390JA023 M 39 OHM, J,1/16W...
  • Page 90 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R9873 D1BB8061A087 M8.06 KOHM,J.1/10W 1 PAVCCZ R9875 D1BB1002A087 M 10KOHM,J.1/10W R9907 D0GA101JA015 M 100 OHM, J,1/16W RM2810 B3RAD0000168 REMOTE SENSOR SN2810 B3JB00000078 SW2000 K0F122A00031...
  • Page 91 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16132 F1H1C105A145 C 1 uF 16 V C16133 F2A1E470B725 E 47UF, 25V 1 PAVCCZ C16135 F1K1E105A029 C 1UF, 25V C16191 F1K1E475A134 C 4.7UF 25V...
  • Page 92 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16724 F1K1E475A134 C 4.7UF 25V C16727 F1E2J331A002 C 330PF, 630V C16729 F1E2J331A002 C 330PF, 630V C16730 F1E2J331A002 C 330PF, 630V C16733 F1E2J332A002 C 3300PF, 630V C16753 F1K1E475A134 C 4.7UF 25V...
  • Page 93 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D14904 B0ECKM000046 DIODE D14905 B0ECKM000046 DIODE D14909 B0ADCJ000100 DIODE D14910 B0ADCJ000100 DIODE D14955 B0ECKM000046 DIODE D14956 B0ECKM000046 DIODE D14962 B0ACCJ000048 DIODE D14976 B0ACCJ000048...
  • Page 94 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D16673 B0ECHS000002 DIODE 1 PAVCCZ D16674 B0ECHS000002 DIODE 1 PAVCCZ D16685 B0ACCJ000048 DIODE D16710 DZ2J15000L ZENER DIODE D16711 B0ECHR000004 DIODE 1 PAVCCZ D16712 B0ECHR000004...
  • Page 95 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks L16011 G0CR56KA0215 INDUCTOR 1 PAVCCZ L16303 G0C471MA0049 PEAKING COIL L16411 G0CR56KA0215 INDUCTOR 1 PAVCCZ L16451 G0ZZ00002183 PEAKING COIL L16452 G0ZZ00002183 PEAKING COIL L16453 G0ZZ00002183...
  • Page 96 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q16820 B1CBGD000001 Q16891 DSA2001S0L TRANSISTOR Q16892 DSC2001Q0L TRANSISTOR R14349 D0GB103JA065 M 10K OHM J 1/10W 1 PAVCCZ R14901 D0GD100JA052 M 10 OHM,J,1/4W R14911 D0GB103JA065...
  • Page 97 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16332 D0GB474JA065 M 470KOHM,J,1/10W 1 PAVCCZ R16334 D0GB472JA065 M 4.7KOHM, J,1/10W R16335 D0GB102JA065 M 1KOHM,J,1/10W R16401 D0GF7R5JA047 M 7.5 OHM,J, 1/3W R16402 D0GF7R5JA047 M 7.5 OHM,J, 1/3W...
  • Page 98 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16570 EXB38V472JV M 4.7 kOHM 1/16 W R16573 D0GB103JA065 M 10K OHM J 1/10W 1 PAVCCZ R16579 EXB38V470J M 47 OHM 1/16 W...
  • Page 99 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16845 D1BD6982A077 M69.8KOHM,D.1/10W 1 PAVCCZ R16846 D1BD6042A077 M60.4KOHM,D.1/10W 1 PAVCCZ R16847 D1BD6492A077 M64.9KOHM,D.1/10W 1 PAVCCZ R16851 D0GB474JA065 M 470KOHM,J,1/10W 1 PAVCCZ R16852 D0GB474JA065...
  • Page 100 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17264 D0GB681JA065 M 680 OHM,J,1/10W 1 PAVCCZ R17267 EXB38V470J M 47 OHM 1/16 W R17268 EXB38V470J M 47 OHM 1/16 W R17269 EXB38V681J...
  • Page 101 Model No. : TX-P50C3E/J, PR50C3 Exploded View 1 S-57...
  • Page 102 Model No. : TX-P50C3E/J, PR50C3 Exploded View 2 S-58...
  • Page 103 Model No. : TX-P50C3E/J, PR50C3 Packing 1 S-59...
  • Page 104 Model No. : TX-P50C3E/J, PR50C3 Packing 2 S-60...
  • Page 105 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks BAT-C-0487 Battery Cover of RC 1 PAVCCZ K2AHYH000042 AC INLET WITH CABLE 1 PAVCCZ K2CN3YY00006 AC CORD 1 P50C3E, PR50C3 K2CS3YY00010 AC CORD...
  • Page 106 Model No. : TX-P50C3E/J, PR50C3 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TQB0E2066Z INSTRUCTION BOOK(ESTONIAN) 1 PAVCCZ P50C3E TQB0E2064A INSTRUCTION BOOK(GERMAN) 1 PAVCCZ P50C3J TQB0E2064C INSTRUCTION BOOK(ITALIAN) 1 PAVCCZ P50C3J TQB0E2064D INSTRUCTION BOOK(FRENCH) 1 PAVCCZ P50C3J...

This manual is also suitable for:

Tx-p50c3jTx-pr50c3

Table of Contents