9 Disassembly and Assembly Instructions
9.1.
Remove the Rear cover
1. See PCB Layout (Section 3)
9.2.
Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screws (×2
9.3.
Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable
2. Disconnect the connectors (P2, P6, P9, P11, P34 and
P35).
3. Remove the screws (×7
) and remove the AC inlet.
) and remove the P-Board.
9.4.
Remove
cover
1. Remove the screws (×2
2. Remove the Side terminal cover.
9.5.
Remove the Tuner unit
1. Remove the Side terminal cover. (See section 9.4.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (A1, A6, A11 and A14).
4. Disconnect the flexible cables (A20, A31 and A32).
5. Remove the screws (×3
23
the
Side
terminal
).
) and remove the Tuner unit.