Vera-Lift™ Back Belt, Sitting Sling, And Gait Belt Ordering Information Vera-Lift Sling Ordering; Double Strap Contour Back Belts - Vancare Vera-Lift V350 Operating Manual

TM
VERA-LIFT
Ordering Information
TM
VERA-LIFT Back Belts
Sizing
The VERA-LIFT™ back belt should be wide enough to fit from the top of the gluteal fold
(between the buttocks) to 2 – 3 inches below the lower edge of the patient's shoulder
blades. The back belt should be long enough for belt fabric to fit around the patient's
abdomen without loop fabric touching the patient.
Material
Back belt and sitting slings are available in your choice of standard polyester, high-heat
polyester (which withstands temperatures up to 200°). You may also choose cool-heat
polyester (which withstands temperatures up to 167°) and has a non-absorbent coating on
one side for easy spot cleaning.

Double Strap Contour Back Belts

(For Skilled Nursing and Long Term Care Facilities)
Double strap back belts can be used with the white straps
connected to the lift arm hooks to transfer patients with
predictable, cooperative behavior who meet the other single
strap connection criteria. Patients with cooperative but
unpredictable behavior, patients with one-sided weakness and
patients with a single lower amputation can be safely
transferred with the white straps crossed and the colored
straps connected straight to the lift arm hooks. (Refer to
"Patient Assessment Criteria" and "VERA-LIFT™ Transfer
Procedures" for specific information.)
10-Inch Wide Contour Back Belt
Size Length
Small 35 inches long
Medium 40 inches long
Large 46 inches long
Ex-large 62 inches long
13-Inch Wide Contour Back Belt
Size Length
Small 35 inches long
Medium 40 inches long
Large 46 inches long
Ex-large 62 inches long
November 2017
Back Belt, Sitting Sling, and Gait Belt
Part Number
5-091020
5-092020
5-093020
5-094020
Part Number
5-091023
5-092023
5-093023
5-094023
For your nearest distributor, call 1-800-694-4525 25