Advertisement
Vox
G11V enables hands free conversations through the VOX function: just speak in the
direction of the microphone and the communication will be automatically activated.
The VOX sensitivity can be adjusted in 10 different levels (0,1,2,3...9) trough the
programming software:
0 means that the VOX is turned off, 1 is the lowest VOX sensitivity level and 9 is
the highest one.
By default, the VOX sensitivity of G11V is set on level 5.
To activate the VOX feature, keep pressed for about 4 sec. the Function key1.
Squelch
The Squelch function suppresses noises on free channels and allows to receive even
weak signals.
G11V has 10 different Squelch levels settable by programming software: 0 means
that the Squelch is turned off; from level 1 to level 9 you will have different levels of
noise reduction. The higher is the level, the louder will be the Squelch.
By default, the Squelch level of G11V is set on level 5.
Make sure you do not set an excessively high squelch level because in this case you may
not be able to receive weaker signals. On the other hand an excessively low Squelch value
could enable the Squelch even when no signals are present.
Squelch must always be adjusted when no signals are present.
The Time Out timer is settable from 30 sec to 270 sec. only through the program-
ming software.
This feature is disabled by default.
Roger Beep (end of transmission tone)
When the PTT button is released, the radio will beep to confirm to other users that
you've finished your transmission and that they can begin to speak.
Beep Tone
This function permit you to produce a beep tone every time you press a button.
Midland G11V instruction guide
| 7
Advertisement
