Installation; Installation Location; Attaching The Plastic Wedges - Defy G10750 NE Instruction Manual

Installation

3

Installation location

In order to prepare the product for use, refer
to the information in the user manual and
ensure that electrical installation is
appropriate. If not, call a qualified electrician
to have any necessary arrangements carried
out.
WARNING: The manufacturer
assumes no responsibility for
any damage caused by the
work carried out by
unauthorized persons.
WARNING: The product's
power cable must be unplugged
during installation. Failure to do
so may result in death or
serious injuries!
WARNING: If the door span is
too narrow for the product to
pass through, remove the door
and turn the product sideways;
if this does not work, contact the
customer care line.
Place the product on a flat surface to avoid
vibration.
Place the product at least 30 cm away
from heaters, stoves and similar sources
of heat and at least 10 cm away from
electric ovens.
Do not expose the product to direct
sunlight or keep in damp environments.
The product requires adequate air
circulation to function efficiently. If the
product will be placed in an alcove,
remember to leave at least 10 cm distance
between the product and the ceiling and
the walls.
Do not install the product in environments
with temperatures below 10°C.
Please ensure that there is a 10 cm air
gap right round the fridge.
Attaching the plastic Spacers
Use the plastic spacers provided with the
product to provide sufficient space for air
circulation between the product and the wall.
1. To attach the spacers, remove the screws
on the product and use the screws provided
with the spacers.
2. Attach the 2 plastic spacers on the
ventilation cover shown as in the figure.
Page 8