Introduction; Unpacking; Installation; Electrical Installation - Defy C375 Owner's Manual

Introduction.


Congratulations on the purchase of this quality refrigerator.

We trust that you will enjoy many years of trouble free use. Please read these instruc-
tions carefully as they will provide you with information on how to operate and care for
your refrigerator in order that you gain the maximum benefit from it.

Unpacking.


Do not connect the refrigerator to the power supply until all packing and transit protec-
tors have been removed.

Please memorise the position of accessories so that after unpacking and cleaning, they
may be repositioned correctly.
 Please ensure that packaging material is disposed of in a responsible manner. Plastic
bags should be cut up to prevent children playing with them and accidentally suffocat-
ing.

If the refrigerator is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.

Allow the refrigerator to stand upright for at least 1/2 an hour before switching on the
power. This will allow fluids in the system to settle.

Installation.


The appliance should be positioned in a dry, well aired place, and away from heat
sources such as stoves, geysers and direct sunlight.

We do not recommend locating the refrigerator in an outdoor environment.

Allow an unobstructed air space at the sides and top of the refrigerator for ventilation
purposes. (fig 3)

Fit the two plastic wall spacers (supplied) to the condenser at the rear of the refrigerator
by rotating them 1/4 turn. (fig 4)

It is essential to level the unit by turning the two adjustable levelling feet at the front of
the unit either in or out. (fig 5)

It is advisable to adjust the cabinet so that it tilts slightly backwards. This will assist the
door to close and help the magnetic gasket maintain a good seal.

Electrical installation.

This refrigerator must be earthed and the manufacturer and the seller do not accept
responsibility for any damage due to incorrect electrical connection.

The refrigerator must be connected to a 220-250V –50Hz electricity supply via a 15A-
3 pin plug and an earthed wall socket in a readily accessible position.
 If the mains power cord is damaged, it must be replaced by a qualified electrician.

We do not recommend the use of adapter plugs or extension cords.
PAGE 5 OF 15