Defy G10750 NE Instruction Manual page 25

Troubleshooting
The freezer temperature is very low, but the cooler temperature is adequate.
The freezer compartment temperature is set to a very low degree. >>> Set the freezer
compartment temperature to a higher degree and check again.
The cooler temperature is very low, but the freezer temperature is adequate.
The cooler compartment temperature is set to a very low degree. >>> Set the cooler
compartment temperature to a higher degree and check again.
The food items kept in cooler compartment drawers are frozen.
The cooler compartment temperature is set to a very low degree. >>> Set the freezer
compartment temperature to a higher degree and check again.
The temperature in the cooler or the freezer is too high.
The cooler compartment temperature is set to a very high degree. >>> The cooler
compartment temperature setting influences the freezer compartment temperature.
Change the cooler or freezer compartment's temperature and wait until the relevant
compartments reach the adjusted temperature level.
The doors were opened frequently or kept open for long periods. >>> Do not open the
doors too frequently.
The door may be ajar. >>> Fully close the door.
The product may have been recently plugged in or a new food item is placed inside. >>>
This is normal. The product will take longer to reach the set temperature when recently
plugged in or a new food item is placed inside.
Large quantities of hot food may have been recently placed into the product. >>> Do not
place hot foods into the product.
Shaking or noise.
The ground is not level or durable. >>> If the product is shaking when moved slowly,
adjust the feet to balance the product. Also make sure the ground is sufficiently durable to
bear the product.
Any items placed on the product may cause noise. >>> Remove any items placed on the
product.
The product is making noise of liquid flowing, spraying etc.
The product's operating principles involve liquid and gas flow. >>> This is normal and not
a malfunction.
There is sound of wind blowing coming from the product.
The product uses a fan for the cooling process. This is normal and not a malfunction.
There is condensation on the product's internal walls.
Hot or humid weather will increase icing and condensation. This is normal and not a
malfunction.
The doors were opened frequently or kept open for long periods. >>> Do not open the
doors too frequently; if open, close the door.
The door may be ajar. >>> Fully close the door.
There is condensation on the product's exterior or between the doors.
The ambient weather may be humid, this is quite normal in humid weather. >>> The
condensation will dissipate when the humidity is reduced.
Page 25