Defy G10750 NE Instruction Manual page 14

Using the product
1. Quick cooling function indicator
Switches on when the quick fridge function is
activated.
2. Fridge compartment temperature
indicator
Temperature of the fridge compartment is
shown; it may be set to 8,7,6,5,4,3,2,1.
3. Fahrenheit indicator
When the Fahrenheit indication is activated,
the temperature set values are shown in
Fahrenheit and the relevant icon switches
on.
4. Key lock
Press key lock button continually for 3
seconds. The Key lock symbol will light up
and key lock mode will be activated. Buttons
will not function if the Key lock mode is
active. Press the key lock button continually
for 3 seconds again. The Key lock symbol
will switch off and the key lock mode will exit.
Press the key lock button to prevent
changing of the temperature setting of the
refrigerator.
5. Power failure/High temperature / error
warning
This indicator illuminates during power
failure, high temperature failures and error
warnings. During long-term power failures,
the highest temperature value that the
freezer compartment reaches will flash on
the digital display. After checking the food
located in the freezer compartment, press
the alarm off button to clear the warning.
Please refer to "solutions recommended for
troubleshooting" section on your manual if
you observe that this indicator is illuminated.
6. Filter reset icon
This switches on when the filter needs to be
reset.
7. Temperature change cabin icon
Indicates the cabin whose temperature is to
be changed. When the temperature change
cabin icon starts flashing, it indicates that the
relevant cabin has been selected.
8. Multizone freezer icon (Optional)
Highlight the Multizone freezer icon using the
FN button; the icon will start to flash. When
you press the OK button, Multizone cabin
freezer icon will switch on and the zone
operates as a freezer.
9. Freezer compartment temperature
indicator
Temperature of the fridge compartment is
shown; it can be set to -18, -19, -20, -21, -22,
-23, -24.
10. Quick freeze function indicator
It switches on when the quick freeze function
is activated.
11. Fahrenheit indicator
When the Fahrenheit indication is activated,
the temperature set values are shown in
Fahrenheit and the relevant icon switches
on.
12. Quick freeze function button
Press this button to activate or deactivate the
quick freeze function. When you activate the
function, the freezer compartment will be
cooled to a temperature lower than the set
value.
Use the quick freeze function
when you want to quickly freeze
the food placed in the freezer
compartment. If you want to
freeze large amounts of fresh
food, activate this function before
putting the food into the product.
If you do not cancel it, Quick
Freeze will cancel itself
automatically after 4 hours or
when the fridge compartment
reaches the set temperature.
This function is not recalled when
power restores after a power
failure.
13. Filter reset
The filter is reset when the quick freeze
button is pressed for 3 seconds. Filter reset
icon goes off.
14. FN button
Use this button to switch between functions
that you would like to select. Upon pressing
this button, the icon indicator starts flashing
of the function that will be activated or
deactivated. The FN button will deactivate if
not pressed for 20 seconds. Press this
button again to change the functions.
Page 14